How to make a TuTu Elf Wreath

So I found some cute ideas on Pinterest but none of them had step by step instructions on HOW to make them. So here is how I decided to make my super cute TuTu Elf Wreath.

Supplies:
Wreath from any craft store. This one is a foam one, I recomend getting a straw one and keeping the plastic wrap that it comes in on.
1 roll of 11/2 Ribbon to wrap the wreath in, color of your choice. This wreath took an entire roll.
Stick pins
Tool I recommend buying the tool on the spools. For this wreath I used two colors. Your choice. But at lease buy 2 spools of each color just in case.
1 1/2 inch ribbon for the elf legs and leg warmers
Black Felt
Hot Glue Gun and Glue sticks
Any other goodies you would like to add to your elf :-)

I start off by wrapping my wreath with the ribbon. This way if you can see through a spot on of the tool all you will see is red. I pinned the first end to the wreath then started wrapping. When I got to the end I pinned the end into the wreath as well. Hidden nicely. (See my pretty new ORANGE craft chair ;-))

 Ta-Da, all wrapped. P.S. one of those teeth is now missing since this pic was taken HA! So the Tooth Fairy got to meet the new Elf Wreath last night ;-)

 Now it's time to for my least fav part LOL, cutting the tool. Now I recommend using a handy dandy piece of cardboard cut to your chosen length. This card board is 17 1/2 inches long. It's a life saver when cutting tool.

Wrap the spool of tool around your cardboard until it it finished. Do not wrap too tightly. You want to be able to get your scissors in there to cut. When it's all wrapped slowly cut the tool straight down the ends of each side of the cardbaord. You probably won't use all of this tool but that's OK you can save it for another project.

 Now take your ribbon and one at a time tie a piece of tool in a double knot onto your wreath. I did two red two green all the way around for my wreath.

 This is what the back will look like.

 All pretty :-)

 Now time to attach some legs! Cut two pieces of 1 1/2 inch ribbon to your choice of length

 Now cut out your elf shoe pattern. I got mine from googling images of Elf Shoe Patterns. I'll try to find the pattern on line later and post it :-). I cut it to the smallest size shoe and tapped it together. Then pinned it to my felt.

 Of course you need to cut two :-)

 Now I attached the legs where I wanted them with pins then used my hot glue gun.

 Then hot glue your perfect elf feet

 I decided to add some polka dot leg warmers HA!

 Then I added some bows I made to the top of the leg warmers. I think I will probably add more tonight but here is my finished project for now. Remeber you can embelish your elf wreath as much as you want! tons of great ideas! I'm also goign to add a plaque to the middle later on. I need to finish painting it.

 So stinkin CUTE!